impact crushing

英 [ˈɪmpækt ˈkrʌʃɪŋ] 美 [ˈɪmpækt ˈkrʌʃɪŋ]

网络  冲黄碎; 冲击破碎; 冲击粉碎

化学



双语例句

  1. Project practice of impact crushing technology treating old cement concrete pavement
    冲击破碎技术处理旧水泥混凝土路面工程实践
  2. This series of impact crushers enable to achieve a higher reduction with fewer crushing stages, lowering your capital costs and saving energy.
    该系列反击式破碎机实现了以较少的破碎段数,获得较大的破碎比,降低了投资成本,节约了能源。
  3. Vertical shaft impact crusher is used in fine crushing of medium and hard materials.
    立式冲击破碎机用于中硬物料的细碎加工。
  4. Impact crusher is used to crush medium and fine materials in secondary and tertiary crushing.
    反击式破碎机用于二级三级破碎的中、细碎作业。
  5. Impact of Corn Straw Millstone's Structure and Motion Parameters on Crushing Capability
    玉米秸秆粉碎装置结构、运动参数对粉碎性能的影响
  6. Results Based on the impact experiment results, the dynamic response of the human calcaneus to the impact loading at high crash rate was analyzed, the characteristics of the human calcaneal impact dynamics were obtained, and a typical compressive strain was found to produce calcaneal crushing fracture.
    结果根据实验结果,得到了高速冲击载荷作用下人体跟骨的动态冲击响应,测量了人体跟骨冲击动力学性质,跟骨压缩性应变形成的粉碎性骨折。
  7. The speed impact on the gas flow crushing was analyzed and explored. Some problems that may be initiated by the spray nozzle, gas source and the pipe line were pointed out, and the improved measures and the revised scheme were put forward.
    分析探讨了气流粉碎速度效应对粉碎性能的影响,指出了生产过程中喷嘴、气源以及管路可能引发的一些问题,并提出了改进措施和修正方案。
  8. The piecewise linear contact force model of material layers during impact crushing is put forward, based on the quasi-static compression crushing experiments, in which the parameters of model are analyzed and a revert coefficient is introduced to express the relation between parameters.
    针对冲击破碎过程,在初步准静压破碎实验的基础上,提出了物料层的分段线性接触力模型,并引入恢复系数来表示膨胀阶段和压缩阶段之间的参数关系。
  9. The characteristic of size of product of impact crusher for crushing hard rock
    反击式破碎机用于硬岩破碎时的产品粒度特性
  10. Study on technology of laser cladding on high speed impact crushing machine
    高速冲磨设备激光熔敷强化工艺的研究
  11. Experimental Analysis on Impact Crushing of Nubbly Talcum Materials
    滑石块冲击破碎实验分析
  12. A Study of Impact Crushing of Column-like Single Particles
    柱状单颗粒材料冲击粉碎研究
  13. The paper introduces BG plate feeder, which has big establishing angle, light weight and great impact force for ore, it could be started with full load or no load. It is convenient for maintenance and be optimal choice for semi movable crushing station.
    介绍了BG板式给料机,该机安装倾角大、重量轻、承受矿石冲击力大,可以满载或空载启动,维护保养方便,是半移动破碎站的理想选择。
  14. The paper introduces the fundamental principle and forms of a new-type fine impact crusher The equipment can realize the hi-efficiency, saving energy and fine crushing requirements through testing and checking.
    介绍了一种新型细碎冲击式破碎机的基本原理、构成等,经测试,该机较好地实现了高效、节能和细碎的要求。
  15. Based on statistic to structural parameters of current crushing cavity in back impact crusher, the paper concludes select range of structural parameter of crushing cavity and puts forward the suggestion to improve the shape of cavity by analysis and comparison.
    在统计已有反击式破碎机破碎腔结构参数的基础上,经过分析比较总结出破碎腔结构参数的选择范围,并提出对已有腔形改进的建议。
  16. Energy absorption behavior for axial impact crushing of glass/ epoxy composite externally wrapped circular metal tubes is studied.
    本文研究了外部缠有玻璃纤维增强环氧的金属圆柱管(简称为复合管)在轴向撞击载荷下的能量吸收特性。
  17. The high-energy impact work index and product size distribution of ore samples can be obtained in the test which can be used to predict the power rate and product size distribution of cone crushers for fine and ultra-fine crushing with 1.6% accuracy.
    试验所得的高能冲击功指数和产品粒度分布,可用来预测细碎及超细碎圆锥破碎机的生产单位功耗和所需产品粒度分布,测定精度可达1.6%。
  18. The application of stress wave theory in concrete impact crushing
    应力波理论在冲击混凝土中的应用
  19. An effective mechanical process including impact crushing and pneumatic separation for metal recovery from printed circuit boards scraps was investigated.
    采用冲击破碎和气流分选技术对废线路板的机械分离过程进行了研究。
  20. Research of the Application of Impact Crushing in Ultra-rich Ore Crushing
    冲击破碎法破碎特富矿石的应用研究
  21. Nonlinear force model during material's impact crushing
    物料冲击破碎过程的一种非线性力模型
  22. But Impact crushes crushing technology in our old cement concrete pavement reconstruction in the practical application and research is still at the initial stage of development, the experimental and theoretical research was behind the engineering practice.
    但是冲击碾压破碎技术在我国旧水泥混凝土路面改建工程中的实际应用和研究尚处于起步发展阶段,有关实验和理论研究明显落后于工程实践。
  23. The current research on the impact properties of honeycomb material mainly focuses on its energy absorption under out-of-plane crushing, namely the impact velocity direction is parallel to the axial direction of honeycomb material.
    目前针对蜂窝材料冲击性能的研究多集中于其面外吸能性能,即冲击速度方向平行于蜂窝材料轴线方向。
  24. According to the results of various tests, the factors of impact of the PDC drilling rock crushing effect were analyzed.
    根据各种试验结果,分析影响PDC钻进岩石破碎效果的各项因素。
  25. Use of extrusion crushing and impact crushing by crushing single particles with geometric face contact.
    通过以挤压粉碎和冲击粉碎为主的模型对单个颗粒与几何面相接触的粉碎情况进行研究。
  26. The results obtained show that when the wheel rolls over the joint rails with height difference, the impact action between the wheel and rails is strong, which easily causes crushing and crack of rail head.
    结果表明,当车轮通过钢轨错牙接头时,车轮对钢轨的冲击作用强烈,容易导致轨端产生压溃和碎裂等损伤。
  27. Therefore, it is necessary to conduct an in-depth research in the selection of the key parameters that have an impact on the crushing quality of the High-pressure grinding roll.
    因此有必要对影响高压辊磨机粉碎效果的关键工艺参数进行深入研究。
  28. Welding aluminum honeycomb by the ball hit on the panel to form a permanent collapse pits, and the impact area of the honeycomb core crushing deformation.
    焊接蜂窝铝板受钢球撞击后,上面板形成永久性塌陷凹坑,撞击区域下蜂窝芯层发生压溃变形,上面板与蜂窝芯层之间没有发生剥离和被穿透现象。